Support optional single point and multi-point, and support up to ten touch points
Compatible with various popular games: —POG595 —POG510—Bally Game—fire link Game—IGS Game—IGT Game—Fusion 5 Skill Game—
1. It’s not easy to touch the screen. Since the capacitive contact screen is required to sense the current of the body, it can be operated by the body. If you touch with other objects, there will not be a certain relative, so the possibility of touch screen is basically prevented.
2. Capacitor technology is superior to Resistor Technology in light loss and system power consumption.
3. Capacitive touch screen only needs to be calibrated once or not at all after production. The resistance technology needs routine correction.
4. Capacitive touch screen supports multi touch technology, and unlike resistive touch screen, which is slow to respond, the actual operation is more visual and challenging.
5. High wear resistance, compared with resistor touch screen. Capacitive touch screen has stronger reflection in anti fouling, moisture-proof, wear-resistant and other aspects.
6. Capacitive touch screen only needs touch and no pressure to generate signal.
infrared
Infrared touch screen
Available sizes:19inch 21.5inch 23.8inch 24inch 27inch 32inch 43inch 55inch
Support optional single point and multi-point, and support up to ten touch points
Compatible with various popular games: —POG595 —POG510—Bally Game—fire link Game—IGS Game—IGT Game—Fusion 5 Skill Game—
1. Accurate positioning and high precision
2. long service life
3. High response speed, fast touch response speed
4. Low cost
5. Rich functions
6. Maintenance free: simple installation, operation and control without special tools.
7. There is no need for a special pen. You can write or touch with your fingers, pointer, etc
8. Not afraid of scratches. Even if there are any scratches in the board, it will not affect the operation and use
resistance
Resistive touch screen is a kind of sensor, which converts the physical position of touch point (x, y) in rectangular area into voltage representing X coordinate and Y coordinate. Many LCD modules use resistive touch screens, which can use four, five, seven or eight wires to generate screen bias voltage and read back the voltage at the touch point. Resistive touch screen is basically a structure of film and glass. The adjacent side of film and glass is coated with ITO (nano indium tin metal oxide) coating. ITO has good conductivity and transparency. When touching, the ITO on the lower layer of the film will contact the ITO on the upper layer of the glass, send the corresponding electrical signal through the sensor, send it to the processor through the conversion circuit, and convert it into the X and Y values on the screen through operation, so as to complete the click action and present it on the screen. (the company has stopped using resistive touch screen. If you have special requirements, please contact our sales manager)
